Industrial Grade Space Aluminum
The shelf is constructed from premium space aluminum, ensuring a lightweight yet high-strength frame that is naturally resistant to oxidation and rust in high-humidity zones.
Adjustable Tier Spacing
The No-Drill Suction Bathroom Shelf supports 2 to 3 layer configurations where the vertical height between units can be adjusted to accommodate diverse product dimensions.
Precision Sandblasted Finish
The surface undergoes a specialized sandblasting process to achieve a gun gray or black matte texture that resists water spots and tactile wear over long-term use.
Ergonomic Safety Edging
All metal perimeters are precision-milled and smoothed to ensure an ergonomic grip and prevent skin abrasions during handling or cleaning.
Space Optimization
The scientific dimensions of the Shelf allow for a 30% increase in usable bathroom storage area, fitting seamlessly into corners without being obtrusive.
1. Screw on the screw cap: Assemble the hardware by screwing the cap onto the suction patch to ensure the alignment is correct before mounting.
2. Tear off the film: Prepare the adhesive by carefully tearing off the protective film from the back of the patch, avoiding contact with the sticky surface.
3. Squeeze against the wall: Position the unit by pressing the patch firmly against a clean, dry wall surface to establish an initial temporary bond.
4. Remove the screw cap: Remove the screw cap and temporarily take the metal shelf off the patches to allow for full access to the adhesive surface.
5. Squeeze the patch: Squeeze the patch firmly from the center toward the outer edges to extract all trapped air, ensuring a total vacuum seal with the wall.
6. Fix the shelf again: Reinstall the No-Drill Suction Bathroom Shelf onto the fixed patches and tighten the screw caps to lock the assembly into place.
| Product Name | No-Drill Suction Bathroom Shelf |
| Material | space aluminum |
| Color | Gun Gray/Black |
| Size | 30.5*13*5.5cm / 12*5.1*2.2in |
| Max Capacity | 5kg/layer |
| Model | Version | Length (cm) | Width (cm) | Height (cm) |
| No-Drill Suction Bathroom Shelf | Upgrade | 30 | 13 | 5.5 |
| Standard | 31.5 | 14 | 5 | |
| No-Drill Suction Bathroom Corner Shelf | Upgrade | 28 | 22 | 5.5 |
| Standard | 28 | 21 | 5 |
To ensure the Shelf maintains its 50kg load capacity, it must be installed on hard, non-porous surfaces. These materials allow the vacuum patches to create a perfect airtight seal that remains stable despite high humidity and steam：
Flat tiles
Glass
Wooden boards
Mirrors Flat metal surfaces
Vintage tiles
Installation on the following surfaces is not recommended because their porous or uneven textures prevent a vacuum seal. Additionally, the weight of the Shelf may cause these surface materials to peel or tear, leading to installation failure：
Paint the walls
Plaster wall
Wallpaper wall
Cement wall
Q:What is the maximum weight capacity for daily use?
A: The shelf is engineered for high-performance load-bearing, supporting a static weight of up to 50kg when installed on a compatible smooth surface.
Q: Does the aluminum material rust when exposed to constant water?
A: No. Unlike plated steel, the oxidized space aluminum used in the No-Drill Suction Bathroom Shelf is chemically stable and will not rust or corrode in wet environments.
Q: Will the shelf fall off over time?
A: No. The vacuum-pressure patches are designed for long-term stability. As long as the air is correctly squeezed out during installation, the bond remains secure against steam and weight.
Address
No. 779 Wolong, Xinshu Village, Lizhou Street, Yuyao City, Zhejiang Province, China
Tel
