Many kitchens struggle with crowded countertop space beside the sink. Single-tier dish racks occupy large flat surface and cannot hold a full set of post-meal tableware. Stacking dishes flat slows air-drying speed. Water spills over and leaves wet patches across countertops. Cheap coated-metal racks easily develop rust spots after long-term exposure to splashing water. Users want more capacity without eating up valuable prep counter space.
Our 2-Tier Stainless Steel Dish Drying Rack with Drainboard solves these common kitchen pain points. The vertical two-layer layout doubles storage capacity without expanding footprint. Upright plate slots speed up air circulation, while the matched drainboard catches dripping water to keep worktops dry. All main components are fully detachable for thorough cleaning.
Simply put, it is a countertop vertical dish-drying unit built from SUS304 stainless-steel wire with electropolished finish. Standard dimension: 38.5 cm /15.16 in × 23.3 cm /9.17 in × 36 cm /14.17 in. The upper tier features dedicated upright slots for dinner plates. The lower open-wire shelf holds bowls, mugs, cups and small saucepans. A built-in compartment stores chopsticks, knives, forks and spoons. A removable drainboard underneath collects all dripping water. Every major part can be fully taken apart for rinsing and flat-pack storage.
Vertical Two-Tier Layout: Double-capacity within the same counter footprint
Upright Plate Slots: Optimized spacing for fast air-drying of dinner plates
Built-in Utensil Compartment: For knives, forks, spoons and chopsticks
SUS304 Stainless-Steel Wire + Electropolished Finish: Inherent rust resistance for humid sink-side environment
Fully-Detachable Structure: Tiers, posts, drainboard and utensil holder separate for easy washing
Removable Drainboard: Captures waste water to protect kitchen countertops
1. Space-Saving Two-Tier Vertical Structure Instead of spreading dishes horizontally, this rack makes full use of vertical height. Top tier holds around 10-12 dinner plates in upright slots. Air flows over both sides of each plate for quicker drying. You can grab one single plate without lifting an entire stack. Bottom open-wire shelf accommodates bowls, deep soup bowls, mugs, glasses and small pans. Integrated cutlery compartment keeps flatware separate from dinnerware.
2. Fully Detachable Tool-Free Disassembly Tiers, support posts, drainboard and utensil holder all clip apart without tools. You can rinse individual pieces under tap water, reaching grease and food residue trapped in wire gaps. When not in use, disassemble into flat components for compact cabinet storage or moving-box transport. Re-assembly is quick and straightforward.
3. Heavy-Gauge SUS304 Stainless-Steel Wire with Electropolished Surface Constructed from thick-gauge genuine SUS304 stainless-steel wire, not painted ordinary iron wire. The material itself resists rust; scratches will not trigger rust spreading. Electropolished treatment delivers smooth bright surface, repels grease and is easy to wipe clean. All wire ends are rounded, eliminating sharp burrs that nick hands or scratch tableware. The frame stays rigid and will not sag under full family-sized dish loads.
4. Removable Drainboard All dripping water from upper and lower tiers flows into the pull-out drainboard. Slide it out to empty collected water, preventing puddles on your countertop.
5. Well-Balanced Slot Spacing Plate-slot gaps are carefully calibrated. Not too tight to block airflow, not too loose to waste capacity. Fits most common household dinner-plate sizes. Custom widened slots and lengthened frames are available for extra-large plates upon OEM orders.
Double Dish-Storage Capacity On Same Counter Footprint
Compared with single-tier models, it holds twice the volume of tableware without demanding extra counter width. Highly valuable for small-size apartments and rental kitchens.
Faster, More Convenient Dish Access
Plates stand upright; pick exactly what you need without shifting stacked dishes. Upright placement improves cross-ventilation so dishes dry more rapidly.
Centralized drainboard catches all dishwater, so you avoid constant mopping of wet sink-side counter surfaces.
Easy Deep Cleaning Thanks To Detachable Parts
No hard-to-reach trapped grime. Take every section apart for complete rinsing, which reduces mold build-up and extends product service life.
Child-Friendly Height For Family With KidsPlates sit elevated on the top tier, staying out of young children’s reach and lowering risk of broken dishware.
Measure available counter length and depth beside your sink before purchase.
Know your typical dinner-plate diameter; select standard model or custom widened slots for oversized plates.
Prioritize genuine SUS304 stainless-steel with electropolished finish, avoid painted iron alternatives.
Confirm that main parts can be detached for regular deep cleaning.
Commercial buyers can request custom lengthened frames and heavier wire gauge for larger-volume dish loads.
Reference dimension: 38.5 cm /15.16 in × 23.3 cm /9.17 in × 36 cm /14.17 in
Small Rental Kitchen & Studio Apartment: Maximize limited counter workspace.
2-5-Person Household Kitchen: Handles full post-meal dish loads in one single rack.
Family With Young Children: Elevated plate storage reduces risk of broken dishes.
Light-Commercial Pantry: Suitable for small café back-of-house, staff kitchenettes.
Different target markets require varied dimensions, plate-slot width, wire thickness and accessory layouts. Kaihufeng Technology provides full-range OEM & ODM service for this 2-Tier Stainless Steel Dish Drying Rack.
Overall dimension: length, depth, height
Plate-slot spacing: widen slots for large-size dinner plates
Stainless-steel wire gauge: standard / heavy-gauge for heavy-use scenarios
Surface craft: electropolishing
Branding: laser-engraved logo, custom retail carton & labels
Packaging: flat-pack export carton solution
Typical MOQ: 500-1000 pcs per model. Pilot small-batch orders are negotiable for new partners.
Provide drawing / sample / target price and order quantity.
Confirm all specifications and issue formal quotation.
Pre-production sample confirmation (highly recommended).
Mass-production with inline QC inspection.
Final inspection, packaging and export shipment arrangement.
A1： It is sized for a family of 4-5 people. Approximately 10-12 dinner plates on upper tier; bowls, mugs and small pans on lower tier plus separate cutlery compartment. Larger-plate or high-capacity versions can be custom-made.
A2：Within the same counter width, two-tier nearly doubles total dish capacity by utilizing vertical space. Plates stored upright allow easy single-plate access without lifting stacked tableware.
A3：No. A removable drainboard catches dripping water from both tiers. Slide it out and empty collected water in time.
A4：Yes. Tiers, support posts, drainboard and utensil holder can all separate without tools. Each piece can be rinsed individually under tap water.
A5：Yes. It adopts heavy-gauge SUS304 stainless-steel wire with electropolished finish. Rust-resistance comes from the material itself rather than surface paint, so scratches will not cause rust outbreaks.
A6：Standard slots fit common household plates. Send your plate diameter data; we can widen slots or lengthen rack frame via custom OEM orders.
A7： Yes. OEM branding including laser-engraved logo and custom carton & labels is available upon meeting MOQ.
A8：We highly recommend pre-production sample confirmation to verify dimension, slot spacing, surface finish and packaging quality before large-batch investment.
The 2-Tier SUS304 Stainless Steel Dish Drying Rack with Drainboard solves common kitchen sink-side pain points: insufficient dish-holding capacity, limited counter space, inconvenient plate access and hard-to-clean hidden grime. Built with heavy-gauge electropolished SUS304 stainless-steel wire, this fully-detachable vertical rack delivers double-tier storage, upright plate drying and integrated cutlery storage together with water-collecting drainboard. It fits small rental kitchens, regular households and light-commercial pantries.
When sourcing, do not judge merely by outward appearance and price. Evaluate SUS304 material authenticity, wire gauge, plate-slot rationality, full disassembly capability and drainboard usability, which determine long-term practical experience.
For brands, distributors and project purchasers, customization can further improve market adaptability. Working with experienced manufacturer Kaihufeng Technology helps you develop rack specifications matching local-market requirements.
